Technology news and discussion on TalkFuse.
Carbon dioxide cooling could speed geothermal drilling in extreme heat
Mazama Energy says its Carbon Chill system could address a key obstacle to geothermal drilling: heat that damages equipment when wells go deep or drilling speeds increase. The company uses carbon dioxide to cool the drill bit and clear rock cuttings, reporting a 20% increase in drilling speed; faster drilling could reduce costs and help geothermal compete as electricity demand grows.
The system pumps liquid carbon dioxide down the drill string, where heat turns it supercritical. Near the drill head, it expands through a nozzle and cools rapidly, drawing heat away from the equipment. Drilling accounts for about 25% to 30% of a geothermal plant’s cost, and Mazama has reported wells above 700°F (about 371°C); it aims to complete a well capable of generating up to 15 megawatts by next year. Super-hot rock above 752°F (400°C) may yield much more energy per well, but is difficult to access with conventional drilling.
In short
- Mazama reports Carbon Chill increased drilling speed by 20%.
- The system uses expanding carbon dioxide to cool drill equipment.
- The company targets a 15-megawatt well by next year.
Steelman: both sides, in good faith
The strongest fair case each way — we don't pick a winner.
The case for
If carbon dioxide cooling can safely deliver the reported speed increase, it could reduce drilling costs and make geothermal power more competitive. Reaching hotter rock could also produce more electricity from each well, supporting reliable low-carbon energy as demand grows.
The case against
The reported 20% speed increase comes from the company, and it remains to be seen whether the system will perform reliably and economically in commercial projects. Drilling deeper and hotter wells still presents engineering and cost challenges, so the promised gains may not be enough to make geothermal competitive.
Explained simply
Geothermal power uses heat from rocks deep underground to produce electricity. A plant needs wells drilled into hot rock, but the heat can damage drilling equipment, especially at great depths or when work speeds up.
Mazama Energy is developing a system that uses carbon dioxide to cool the drill bit and help clear broken rock. Drilling is a substantial part of the cost of building a geothermal plant, so drilling faster could reduce costs.
The goal is to reach extremely hot rock, which may provide more energy from each well but is harder to drill into. If such wells become practical, geothermal power could contribute more electricity as demand grows.
Read the full article at the source →
Originally published by TechCrunch as “Mazama Energy has a solution for geothermal’s biggest drilling problem”.